ALUMINIUM PIPE
PART NO. SIZE MM/SM (DIA OF PIPE) LENGTH OF PIPE (METERS) 82.900.020.104 20 20 82.900.020.105 25 25 82.900.020.106 40 40 82.900.020.106 50 50 82.900.020.106 63 63
Pneumsys–old
Luthra Pneumsys, the perfect example of productivity and adaptability, serves as a reliable solution for a multitude of applications, including compressed air, vacuum, inert gas, process water, and chemical transfers.
Luthra Pneumsys aluminium pipes come with a mirror finish on the inside, thus ensuring laminar flows. The unmatched finish on the inside is a protective layer to ensure no oxidation of the inside of the pipe when exposed to water, oil, or all other contaminants, so the media flowing through the pipe remains integral in nature. This is in stark contrast to conventional materials like black iron or copper, which are known to deteriorate over time just because of corrosion. Pneumsys consistently provides pristine air quality while maintaining peak flow rate performance, in perfect harmony with our commitment to energy efficiency and sustainable product design.
Our Certifications
PRODUCT QUALITY
- ISO Certification – Luthra Pneumsys Connectors manufacturing facilities are certified ISO 9001 version 2015 and operate a quality management system in order to ensure the level of quality and service that is expected by the customer.
- Qualicoat Certification – All aluminum pipes are coated with a lacquered powder-coated finish with a Qualicoat-certified coating for additional environmental protection. PRESSURE VESSEL REQUIREMENTS.
- ASME B31.1/B31.3 Conformity – Luthra Pneumsys meets the requirements of ASME B31.1 & B31.3, which stipulates “the minimum requirements for the design, materials, fabrication, erection, test, and inspection of power and auxiliary piping systems for industrial institutional plants” as non-boiler external piping.”
SAFETY STANDARDS
- Luthra Pneumsys meets standards for safety, quality, & compliance as specified for process piping.
ENVIRONMENTAL PROTECTION
- ISO 14001 – MSYS is ISO 14001 certified for our environmental management system, which requires a plan to reduce the environmental impact of manufacturing and selling products.
- REACH – RoHS – AUll MSYS products comply with the REACH and RoHS directives, which limit the use of hazardous substances.
- Recyclable – All Luthra Pneumsys products are 100% recyclable.
MEDIA QUALITY
- ISO 232021 Certification – ISO 8573 is the international standard for compressed air quality. Luthra Pneumsys products have been tested to meet the highest air quality standard found within ISO 8573. The air quality is dependent on the treatment performed in the compressor room. Luthra Pneumsys will not introduce additional solid particles, water, moisture, or oil into the media being conveyed.
- Oil-Free Certificate – Luthra Pneumsys products will not contaminate the conveyed media with grease or oil products.
LONG-TERM COMMITMENT
- 10-Year Warranty – Luthra Pneumsys warrants its products to be free of manufacturing defects in material and workmanship to be used for oil-free and moisture-free compressed air for 10 years from the date of installation.
Push-Fit Range
Luthra Pneumsys Push-In Fitting has a 100% aluminium and an integral design that has the O ring housed securely in the body of the fitting, so there is no chance of it getting dislodged during assembly/disassembly/misaligned during assembly.
Push-Fit Range
Push-Fit Range
STRAIGHT CONNECTOR
PART NO. SIZE MM/SM (DIA OF PIPE) PN0220 20 PN0225 25 PN0240 40 PN0250 50 PN0263 63
Push-Fit Range
MALE ADAPTOR
PART NO. SIZE MM/SM (DIA OF PIPE) PN052012 20 X 1/2″ PN052034 20 X 3/4″ PN052512 25 X 1/2″ PN052534 25 X 3/4″ PN052501 25 X 1″ PN0540114 40 X...
Push-Fit Range
FEMALE ADAPTOR
PART NO. SIZE MM/SM (DIA OF PIPE) PN062012 20 X 1/2″ PN062534 25 X 3/4″ PN0640114 0 X 1.1/4″ PN0650112 50 X 1.1/2″ PN066302 63 X 2″
Push-Fit Range
Push-Fit Range
MALE THREADED ELBOW
PART NO. SIZE MM/SM (DIA OF PIPE) PN322012 20 X 1/2″ PN322534 25 X 3/4″ PN3240112 40 X 1.1/2″ PN3250112 50 X 1.1/2″ PN326302 63 X 2″
Push-Fit Range
Push-Fit Range
FEMALE THREADED TEE
PART NO. SIZE MM/SM (DIA OF PIPE) PN4120 20 X 1/2″ PN4125 25 X 3/4″ PN4140 40 X 1.1/4″ PN4150 50 X 1.1/2″ PN4163 63 X 2″
Push-Fit Range
REDUCER
PART NO. SIZE MM/SM (DIA OF PIPE) PNRSC2520 20 X 20 PNRSC4020 40 X 20 PNRSC4025 40 X 25 PNRSC5020 50 X 20 PNRSC5025 50 X 25 PNRSC5040 50 X...
Push-Fit Range
Push-Fit Range
ALUMINIUM PUSHFIT & THREADED MANIFOLD BLOCK
PART NO. SIZE MM/SM (DIA OF PIPE) ALPNMB2012 20 X 1/2″ -3 PURGE ALPNMB2512 25 X 1/2″ -3 PURGE ALPNMB1212 1/2″ X 1/2″ -3 PURGE ALPNMB3412 3/4″ X 1/2″ -3...
Groove-Fit Range
Luthra Pneumsys Groove coupling and push-in fittings are manufactured from 100% aluminium, and test reports can be given for the same. The couplings are having superior cataphoresis coating to ensure 100% resistance to any effect due to weather conditions.
Groove-Fit Range
ALUMINIUM PIPES
NOTE: For Pipes required with Grooved ends to be used with Grooved Couplings, the above model nos to be used with “-G” added as a suffix at the end of...
Groove-Fit Range
GROOVE COUPLING
PART NO. SIZE MM/SM (DIA OF PIPE) PNGR0240 40 PNGR0250 50 PNGR0263 63 PNGR0290 90 PNGR02100 100 PNGR02150 150 PNGR02200 200 PNGR02250 250
Groove-Fit Range
MALE ADAPTOR
PART NO. SIZE MM/SM (DIA OF PIPE) PNGRM0240 40 X 1.1/2″ PNGRM50112 50 X 1.1/2″ PNGRM5002 50 X 2″ PNGRM6302 63 X 2″ PNGRM63212 63 X 2.1/2″ PNGRM9003 90 X...
Groove-Fit Range
FEMALE ADAPTOR
PART NO. SIZE MM/SM (DIA OF PIPE) PNGRF40112 40 X 1.1/2″ PNGRF50112 50 X 1.1/2″ PNGRF5002 50 X 2″ PNGRF6302 63 X 2″ PNGRF63212 63 X 2.1/2″ PNGRF90112 90 X...
Groove-Fit Range
FLANGE ADAPTOR
PART NO. SIZE MM/SM (DIA OF PIPE) PNGRF40112 50 X 50 PNGR0563 63 X 63 PNGR0590 90 X 90 PNGR05100 100 X 100 PNGR05150 150 X 150 PNGR05200 200 X...
Groove-Fit Range
EQUAL ELBOW
PART NO. SIZE MM/SM (DIA OF PIPE) PNGR0340 40 PNGR0350 50 PNGR0363 63 PNGR0390 90 PNGR03100 100 PNGR03150 150 PNGR03200 200 PNGR03250 250
Groove-Fit Range
EQUAL TEE
PART NO. SIZE MM/SM (DIA OF PIPE) PNGR0440 40 PNGR0450 50 PNGR0463 63 PNGR0490 90 PNGR04100 100 PNGR04150 150 PNGR04200 200 PNGR04250 250
Groove-Fit Range
FEMALE THREADED TEE
PART NO. SIZE MM/SM (DIA OF PIPE) PNFRT50112 50 X 1.1/2″ PNFRT63112 63 X 1.1/2″ PNFRT90212 90 X 2.1/2″ PNFRT15033 150 X 3″
Groove-Fit Range
REDUCING TEE
PART NO. SIZE MM/SM (DIA OF PIPE) PNRT6350 65 X 50 PNRT9050 90 X 50 PNRT9063 90 X 63 PNRT150100 150 X 100
Groove-Fit Range
REDUCING STRAIGHT CONNECTOR
PART NO. SIZE MM/SM (DIA OF PIPE) PNRSC5020 50 X 20 PNRSC5025 50 X 25 PNRSC5040 50 X 40 PNRSC6325 63 X 25 PNRSC6340 63 X 40 PNRSC6350 63 X...
Groove-Fit Range
END CUP
PART NO. SIZE MM/SM (DIA OF PIPE) PNGR1040 40 PNGR1050 50 PNGR1063 63 PNGR1090 90 PNGR10100 100 PNGR10150 150 PNGR10200 200 PNGR10250 250
Groove-Fit Range
SADDLE BRANCH
PART NO. SIZE MM/SM (DIA OF PIPE) PNSB2212 22 X 1/2″ PNSB2512 25 X 1/2″ PNSB2812 28 X 1/2″ PNSB3212 32 X 1/2″ PNSB4012 40 X 1/2″ PNSB4034 40 X...
Accessories Range
Accessories are critical components used in conjunction with pipe fittings to secure, support, and stabilize piping systems in various industrial, commercial, and residential applications. These accessories ensure that pipes remain firmly in place and are safely routed through different structures.
Accessories Range
QUICK DROP
PART NO. SIZE MM/SM (DIA OF PIPE) PNQD2520 25 X 20 PNQD3220 32 X 20 PNQD4020 40 X 20 PNQD4025 40 X 25 PNQD5020 50 X 20 PNQD5025 50 X...
Accessories Range
SADDLE WITH ELBOW OUTLET
PART NO. SIZE MM/SM (DIA OF PIPE) PNSE2520 25 X 20 PNSE3220 32 X 20 PNSE4020 40 X 20 PNSE4025 40 X 25 PNSE5020 50 X 20 PNSE5025 50 X...
Accessories Range
Accessories Range
BRASS F/F BALL VALVE
PART NO. DN PNBV15 15-1/2″ PNBV20 20-3/4″ PNBV25 25-1″ PNBV32 32-1.1/4″ PNBV40 40-1.1/2″ PNBV50 50-2″ PNBV63 63- 2.1/2″ PNBV90 90 – 3″ PNBV100 100-4″
Accessories Range
BRASS M/F BALL VALVE
PART NO. DN PNMFBV12 1/2″ PNMFBV34 3/4″ PNMFBV01 1″ PNMFBV114 1.1/4″ PNMFBV112 1.1/2″ PNMFBV02 2″ PNMFBV212 2.1/2″
Accessories Range
AUDCO BALL VALVE (CS BODY)
PART NO. DN PNAUD15 1/2″ PNAUD20 3/4″ PNAUD25 1″ PNAUD32 1.1/4″ PNAUD40 1.1/2″ PNAUD50 2″
Accessories Range
Accessories Range
RUBBER LINED CLAMP WALL FIXING
PART NO. SIZE MM/SM (DIA OF PIPE) PNRLC20 20 PNRLC25 25 PNRLC32 32 PNRLC40 40 PNRLC50 50 PNRLC63 63 PNRLC75 75 PNRLC90 90 PNRLC100 100 PNRLC110 110 PNRLC150 150 PNRLC160...
Accessories Range
RUBBER LINED CLAMP WITHOUT WALL FIXING
PART NO. SIZE MM/SM (DIA OF PIPE) PNRLC20W 20 PNRLC25W 25 PNRLC32W 32 PNRLC40W 40 PNRLC50W 50 PNRLC63W 63 PNRLC90W 90 PNRLC100W 100 PNRLC150W 150
Accessories Range
Accessories Range