Pneumsys
Pneumsys
Luthra Pneumsys, the perfect example of productivity and adaptability, serves as a reliable solution for a multitude of applications, including compressed air, vacuum, inert gas, process water, and chemical transfers.
Luthra Pneumsys aluminium pipes come with a mirror finish on the inside, thus ensuring laminar flows. The unmatched finish on the inside is a protective layer to ensure no oxidation of the inside of the pipe when exposed to water, oil, or all other contaminants, so the media flowing through the pipe remains integral in nature. This is in stark contrast to conventional materials like black iron or copper, which are known to deteriorate over time just because of corrosion. Pneumsys consistently provides pristine air quality while maintaining peak flow rate performance, in perfect harmony with our commitment to energy efficiency and sustainable product design.
Our Certifications
PRODUCT QUALITY
- ISO Certification – Luthra Pneumsys Connectors manufacturing facilities are certified ISO 9001 version 2015 and operate a quality management system in order to ensure the level of quality and service that is expected by the customer.
- Qualicoat Certification – All aluminum pipes are coated with a lacquered powder-coated finish with a Qualicoat-certified coating for additional environmental protection. PRESSURE VESSEL REQUIREMENTS.
- ASME B31.1/B31.3 Conformity – Luthra Pneumsys meets the requirements of ASME B31.1 & B31.3, which stipulates “the minimum requirements for the design, materials, fabrication, erection, test, and inspection of power and auxiliary piping systems for industrial institutional plants” as non-boiler external piping.”
SAFETY STANDARDS
- Luthra Pneumsys meets standards for safety, quality, & compliance as specified for process piping.
ENVIRONMENTAL PROTECTION
- ISO 14001 – MSYS is ISO 14001 certified for our environmental management system, which requires a plan to reduce the environmental impact of manufacturing and selling products.
- REACH – RoHS – AUll MSYS products comply with the REACH and RoHS directives, which limit the use of hazardous substances.
- Recyclable – All Luthra Pneumsys products are 100% recyclable.
MEDIA QUALITY
- ISO 232021 Certification – ISO 8573 is the international standard for compressed air quality. Luthra Pneumsys products have been tested to meet the highest air quality standard found within ISO 8573. The air quality is dependent on the treatment performed in the compressor room. Luthra Pneumsys will not introduce additional solid particles, water, moisture, or oil into the media being conveyed.
- Oil-Free Certificate – Luthra Pneumsys products will not contaminate the conveyed media with grease or oil products.
LONG-TERM COMMITMENT
- 10-Year Warranty – Luthra Pneumsys warrants its products to be free of manufacturing defects in material and workmanship to be used for oil-free and moisture-free compressed air for 10 years from the date of installation.
Field of Application
TRANSPORT AND DISTRIBUTION OF COMPRESSED AIR FOR ANY KIND OF USE.
| SOME TECHNICAL CHARACTERISTICS | |
|---|---|
| Standard Colour | RAL 5012 |
| Max Working Pressure | 16 BARS |
| Plant Testing Pressure 1 Hour at 20°C | 24 BARS |
| Quality Testing Pressure 1 Hour at 20°C | 64 BARS |
| Production Tested Percentage | 100% |
| O.ring | NBR 65/75 S.A. |
| Continuous Service Temp. Limit | -20°C ‘A 100°C |
| Aluminium Pipe Mechanical | According to EN-755-2/2008 |
| Resistance | Standard |
| Pipe Material | Aluminium Alloy EN AW 6063- T5 According to EN-755-2/2008. (External Treatment:- Powder Coating Internal Treatment:- Chromadizing) |
| Internal Treatment | Chromatized |
| Fittings Material | Aluminium |
| Teeth Ring Material | 304 Stainless Steel |
| Threads Standards | ISO 7-1:1994(en) |
Push-Fit Range
Luthra Pneumsys Push-In Fitting has a 100% aluminium and an integral design that has the O ring housed securely in the body of the fitting, so there is no chance of it getting dislodged during assembly/disassembly/misaligned during assembly.
- ALUMINIUM PIPE
| PART NO. | SIZE MM/SM (DIA OF PIPE) |
LENGTH OF PIPE (METERS) |
|---|---|---|
| 82.900.020.104 | 20 | 20 |
| 82.900.020.105 | 25 | 25 |
| 82.900.020.106 | 40 | 40 |
| 82.900.020.106 | 50 | 50 |
| 82.900.020.106 | 63 | 63 |
- STRAIGHT CONNECTOR
| PART NO. | SIZE MM/SM (DIA OF PIPE) |
|---|---|
| PN0220 | 20 |
| PN0225 | 25 |
| PN0240 | 40 |
| PN0250 | 50 |
| PN0263 | 63 |
- MALE ADAPTOR
| PART NO. | SIZE MM/SM (DIA OF PIPE) |
|---|---|
| PN052012 | 20 X 1/2″ |
| PN052034 | 20 X 3/4″ |
| PN052512 | 25 X 1/2″ |
| PN052534 | 25 X 3/4″ |
| PN052501 | 25 X 1″ |
| PN0540114 | 40 X 1.1/4″ |
| PN0540112 | 40 X 1.1/2″ |
| PN0550112 | 50 X 1.1/2″ |
| PN055002 | 50 X 2″ |
| PN056302 | 63 X 2″ |
| PN0563212 | 63 X 2.1/2″ |
- FEMALE ADAPTOR
| PART NO. | SIZE MM/SM (DIA OF PIPE) |
|---|---|
| PN062012 | 20 X 1/2″ |
| PN062534 | 25 X 3/4″ |
| PN0640114 | 0 X 1.1/4″ |
| PN0650112 | 50 X 1.1/2″ |
| PN066302 | 63 X 2″ |
- EQUAL ELBOW
| PART NO. | SIZE MM/SM (DIA OF PIPE) |
|---|---|
| PN0320 | 20 |
| PN0325 | 25 |
| PN0340 | 40 |
| PN0350 | 50 |
| PN0363 | 63 |
- MALE THREADED ELBOW
| PART NO. | SIZE MM/SM (DIA OF PIPE) |
|---|---|
| PN322012 | 20 X 1/2″ |
| PN322534 | 25 X 3/4″ |
| PN3240112 | 40 X 1.1/2″ |
| PN3250112 | 50 X 1.1/2″ |
| PN326302 | 63 X 2″ |
- EQUAL TEE
| PART NO. | SIZE MM/SM (DIA OF PIPE) |
|---|---|
| PN0420 | 20 |
| PN0425 | 25 |
| PN0440 | 40 |
| PN0450 | 50 |
| PN0463 | 63 |
- FEMALE THREADED TEE
| PART NO. | SIZE MM/SM (DIA OF PIPE) |
|---|---|
| PN4120 | 20 X 1/2″ |
| PN4125 | 25 X 3/4″ |
| PN4140 | 40 X 1.1/4″ |
| PN4150 | 50 X 1.1/2″ |
| PN4163 | 63 X 2″ |
- REDUCER
| PART NO. | SIZE MM/SM (DIA OF PIPE) |
|---|---|
| PNRSC2520 | 20 X 20 |
| PNRSC4020 | 40 X 20 |
| PNRSC4025 | 40 X 25 |
| PNRSC5020 | 50 X 20 |
| PNRSC5025 | 50 X 25 |
| PNRSC5040 | 50 X 40 |
| PNRSC6325 | 63 X 25 |
| PNRSC6340 | 63 X 40 |
| PNRSC6350 | 63 X 50 |
- END CAP
| PART NO. | SIZE MM/SM (DIA OF PIPE) |
|---|---|
| PN1020 | 20 |
| PN1025 | 25 |
| PN1040 | 40 |
| PN1050 | 50 |
| PN1063 | 63 |
- ALUMINIUM PUSHFIT & THREADED MANIFOLD BLOCK
| PART NO. | SIZE MM/SM (DIA OF PIPE) |
|---|---|
| ALPNMB2012 | 20 X 1/2″ -3 PURGE |
| ALPNMB2512 | 25 X 1/2″ -3 PURGE |
| ALPNMB1212 | 1/2″ X 1/2″ -3 PURGE |
| ALPNMB3412 | 3/4″ X 1/2″ -3 PURGE |
| ALPNMB1112 | 1″ X 1/2″ -3 PURGE |
Groove-Fit Range
Luthra Pneumsys Groove coupling and push-in fittings are manufactured from 100% aluminium, and test reports can be given for the same. The couplings are having superior cataphoresis coating to ensure 100% resistance to any effect due to weather conditions.
- ALUMINIUM PIPES
| PART NO. | SIZE MM/SM (DIA OF PIPE) |
OD(MM) |
|---|---|---|
| PG-82.900.040.106 | 40 | 5.8 mt. |
| PG-82.900.050.106 | 50 | 5.8 mt. |
| PG-82.900.063.106 | 63 | 5.8 mt. |
| PG-82.900.090.106 | 90 | 5.8 mt. |
| PG-82.900.100.106 | 100 | 5.8 mt. |
| PG-82.900.150.106 | 150 | 5.8 mt. |
| PG-82.900.200.106 | 200 | 5.8 mt. |
| PG-82.900.250.106 | 250 | 5.8 mt. |
NOTE : For pipes required with grooved ends to be used with grooved couplings, the above model is to be used with “-G” added as a suffix at the end of the model number.
- GROOVE COUPLING
| PART NO. | SIZE MM/SM (DIA OF PIPE) |
|---|---|
| PNGR0240 | 40 |
| PNGR0250 | 50 |
| PNGR0263 | 63 |
| PNGR0290 | 90 |
| PNGR02100 | 100 |
| PNGR02150 | 150 |
| PNGR02200 | 200 |
| PNGR02250 | 250 |
- MALE ADAPTOR
| PART NO. | SIZE MM/SM (DIA OF PIPE) |
|---|---|
| PNGRM0240 | 40 X 1.1/2″ |
| PNGRM50112 | 50 X 1.1/2″ |
| PNGRM5002 | 50 X 2″ |
| PNGRM6302 | 63 X 2″ |
| PNGRM63212 | 63 X 2.1/2″ |
| PNGRM9003 | 90 X 3″ |
| PNGRM1002 | 100 X 2″ |
| PNGRM1003 | 100 X 3″ |
- FEMALE ADAPTOR
| PART NO. | SIZE MM/SM (DIA OF PIPE) |
|---|---|
| PNGRF40112 | 40 X 1.1/2″ |
| PNGRF50112 | 50 X 1.1/2″ |
| PNGRF5002 | 50 X 2″ |
| PNGRF6302 | 63 X 2″ |
| PNGRF63212 | 63 X 2.1/2″ |
| PNGRF90112 | 90 X 1.1/2″ |
| PNGRF9003 | 90 X 3″ |
| PNGRF1002 | 100 X 2″ |
| PNGRF1003 | 100 X 3″ |
- FLANGE ADAPTOR
| PART NO. | SIZE MM/SM (DIA OF PIPE) |
|---|---|
| PNGRF40112 | 50 X 50 |
| PNGR0563 | 63 X 63 |
| PNGR0590 | 90 X 90 |
| PNGR05100 | 100 X 100 |
| PNGR05150 | 150 X 150 |
| PNGR05200 | 200 X 200 |
| PNGR05250 | 250 X 250 |
- EQUAL ELBOW
| PART NO. | SIZE MM/SM (DIA OF PIPE) |
|---|---|
| PNGR0340 | 40 |
| PNGR0350 | 50 |
| PNGR0363 | 63 |
| PNGR0390 | 90 |
| PNGR03100 | 100 |
| PNGR03150 | 150 |
| PNGR03200 | 200 |
| PNGR03250 | 250 |
- EQUAL TEE
| PART NO. | SIZE MM/SM (DIA OF PIPE) |
|---|---|
| PNGR0440 | 40 |
| PNGR0450 | 50 |
| PNGR0463 | 63 |
| PNGR0490 | 90 |
| PNGR04100 | 100 |
| PNGR04150 | 150 |
| PNGR04200 | 200 |
| PNGR04250 | 250 |
- FEMALE THREADED TEE
| PART NO. | SIZE MM/SM (DIA OF PIPE) |
|---|---|
| PNFRT50112 | 50 X 1.1/2″ |
| PNFRT63112 | 63 X 1.1/2″ |
| PNFRT90212 | 90 X 2.1/2″ |
| PNFRT15033 | 150 X 3″ |
- REDUCING TEE
| PART NO. | SIZE MM/SM (DIA OF PIPE) |
|---|---|
| PNRT6350 | 65 X 50 |
| PNRT9050 | 90 X 50 |
| PNRT9063 | 90 X 63 |
| PNRT150100 | 150 X 100 |
- REDUCING STRAIGHT CONNECTOR
| PART NO. | SIZE MM/SM (DIA OF PIPE) |
|---|---|
| PNRSC5020 | 50 X 20 |
| PNRSC5025 | 50 X 25 |
| PNRSC5040 | 50 X 40 |
| PNRSC6325 | 63 X 25 |
| PNRSC6340 | 63 X 40 |
| PNRSC6350 | 63 X 50 |
| PNRSC9050 | 90 X 50 |
| PART NO. | SIZE MM/SM (DIA OF PIPE) |
|---|---|
| PNRSC9063 | 90 X 63 |
| PNRSC10050 | 100 X 50 |
| PNRSC10063 | 100 X 63 |
| PNRSC10090 | 100 X 90 |
| PNRSC150100 | 150 X 100 |
| PNRSC200100* | 200 X 100 |
| PNRSC250100 | 250 X 100 |
- END CUP
| PART NO. | SIZE MM/SM (DIA OF PIPE) |
|---|---|
| PNGR1040 | 40 |
| PNGR1050 | 50 |
| PNGR1063 | 63 |
| PNGR1090 | 90 |
| PNGR10100 | 100 |
| PNGR10150 | 150 |
| PNGR10200 | 200 |
| PNGR10250 | 250 |
- SADDLE BRANCH
| PART NO. | SIZE MM/SM (DIA OF PIPE) |
|---|---|
| PNSB2212 | 22 X 1/2″ |
| PNSB2512 | 25 X 1/2″ |
| PNSB2812 | 28 X 1/2″ |
| PNSB3212 | 32 X 1/2″ |
| PNSB4012 | 40 X 1/2″ |
| PNSB4034 | 40 X 3/4″ |
| PNSB5012 | 50 X 1/2″ |
| PNSB5034 | 50 X 3/4″ |
| PNSB5001 | 50 X 1″ |
| PNSB6312 | 63 X 1/2″ |
| PNSB6334 | 63 X 3/4″ |
| PNSB6301 | 63 X 1″ |
| PNSB7501 | 75 X 1″ |
| PART NO. | SIZE MM/SM (DIA OF PIPE) |
|---|---|
| PNSB2212 | 22 X 1/2″ |
| PNSB2512 | 25 X 1/2″ |
| PNSB2812 | 28 X 1/2″ |
| PNSB3212 | 32 X 1/2″ |
| PNSB4012 | 40 X 1/2″ |
| PNSB4034 | 40 X 3/4″ |
| PNSB5012 | 50 X 1/2″ |
| PNSB5034 | 50 X 3/4″ |
| PNSB5001 | 50 X 1″ |
| PNSB6312 | 63 X 1/2″ |
| PNSB6334 | 63 X 3/4″ |
| PNSB6301 | 63 X 1″ |
Accessories Range
Accessories are critical components used in conjunction with pipe fittings to secure, support, and stabilize piping systems in various industrial, commercial, and residential applications. These accessories ensure that pipes remain firmly in place and are safely routed through different structures.
- QUICK DROP
| PART NO. | SIZE MM/SM (DIA OF PIPE) |
|---|---|
| PNQD2520 | 25 X 20 |
| PNQD3220 | 32 X 20 |
| PNQD4020 | 40 X 20 |
| PNQD4025 | 40 X 25 |
| PNQD5020 | 50 X 20 |
| PNQD5025 | 50 X 25 |
| PNQD5032 | 50 X 32 |
| PNQD6320 | 63 X 20 |
| PNQD6325 | 63 X 25 |
| PNQD6332 | 63 X 32 |
| PNQD9020 | 90 X 20 |
| PNQD9025 | 90 X 25 |
| PNQD10020 | 100 X 20 |
| PNQD10025 | 100 X 25 |
- SADDLE WITH ELBOW OUTLET
| PART NO. | SIZE MM/SM (DIA OF PIPE) |
|---|---|
| PNSE2520 | 25 X 20 |
| PNSE3220 | 32 X 20 |
| PNSE4020 | 40 X 20 |
| PNSE4025 | 40 X 25 |
| PNSE5020 | 50 X 20 |
| PNSE5025 | 50 X 25 |
| PNSE5032 | 50 X 32 |
| PNSE6320 | 63 X 20 |
| PNSE6325 | 63 X 25 |
| PNSE6332 | 63 X 32 |
| PNSE9020 | 90 X 20 |
| PNSE9025 | 90 X 25 |
| PNSE10032 | 100 X 32 |
| PNSE10020 | 100 X 20 |
| PNSE10025 | 100 X 25 |
- INLINE BALL VALVE
| PART NO. | DN |
|---|---|
| PNBV2020 | 20 |
| PNBV2525 | 25 |
| PNBV4040 | 40 |
| PNBV5050 | 50 |
- BRASS F/F BALL VALVE
| PART NO. | DN |
|---|---|
| PNBV15 | 15-1/2″ |
| PNBV20 | 20-3/4″ |
| PNBV25 | 25-1″ |
| PNBV32 | 32-1.1/4″ |
| PNBV40 | 40-1.1/2″ |
| PNBV50 | 50-2″ |
| PNBV63 | 63- 2.1/2″ |
| PNBV90 | 90 – 3″ |
| PNBV100 | 100-4″ |
- BRASS M/F BALL VALVE
| PART NO. | DN |
|---|---|
| PNMFBV12 | 1/2″ |
| PNMFBV34 | 3/4″ |
| PNMFBV01 | 1″ |
| PNMFBV114 | 1.1/4″ |
| PNMFBV112 | 1.1/2″ |
| PNMFBV02 | 2″ |
| PNMFBV212 | 2.1/2″ |
- AUDCO BALL VALVE (CS BODY)
| PART NO. | DN |
|---|---|
| PNAUD15 | 1/2″ |
| PNAUD20 | 3/4″ |
| PNAUD25 | 1″ |
| PNAUD32 | 1.1/4″ |
| PNAUD40 | 1.1/2″ |
| PNAUD50 | 2″ |
- BUTTERFLY VALVE
| PART NO. | DN |
|---|---|
| PNBFV63 | 2.1/2″ |
| PNBFV90 | 3″ |
| PNBFV100 | 4″ |
| PNBFV150 | 6″ |
| PNBFV200 | 8″ |
- RUBBER LINED CLAMP WALL FIXING
| PART NO. | SIZE MM/SM (DIA OF PIPE) |
|---|---|
| PNRLC20 | 20 |
| PNRLC25 | 25 |
| PNRLC32 | 32 |
| PNRLC40 | 40 |
| PNRLC50 | 50 |
| PNRLC63 | 63 |
| PNRLC75 | 75 |
| PNRLC90 | 90 |
| PNRLC100 | 100 |
| PNRLC110 | 110 |
| PNRLC150 | 150 |
| PNRLC160 | 160 |
- RUBBER LINED CLAMP WITHOUT WALL FIXING
| PART NO. | SIZE MM/SM (DIA OF PIPE) |
|---|---|
| PNRLC20W | 20 |
| PNRLC25W | 25 |
| PNRLC32W | 32 |
| PNRLC40W | 40 |
| PNRLC50W | 50 |
| PNRLC63W | 63 |
| PNRLC90W | 90 |
| PNRLC100W | 100 |
| PNRLC150W | 150 |
- U – BEND PIPE
| PART NO. | SIZE MM/SM (DIA OF PIPE) |
|---|---|
| 20UBEND | 20 |
| 25UBEND | 25 |
| 40UBEND | 40 |
- S – BEND PIPE
| PART NO. | SIZE MM/SM (DIA OF PIPE) |
|---|---|
| 20SBEND | 20 |
| 25SBEND | 25 |
| 40SBEND | 40 |
